Job Details

home Job Details
Job Title: Inspector - Electrical - MM1021
Location: Saudia, Saudia
  • BS degree in Electrical Engineering  ( 4 years bachelor degree) 
  • Ten (10) years of relevant industrial experience (5 years including in the proposed specific inspection specialty).
  • Demonstrate a thorough working knowledge of National Electric Code/NFPA 70, IEC or equivalent standards for HV equipment’s.
  • Demonstrates a thorough working knowledge of electrical installations, Preventive, predictive, and corrective maintenance, including materials, methods, specifications, and hazardous location classification.
  • Candidate should Have general knowledge of ISO 9001 quality requirements as well as international standards, as applicable to their proposed discipline.
  • If having any certification like, ISO 9001:2008/2015, NFPA 70 Certified or equivalent will be preferable.
Department: Power Systems Department
Experience: Ten (10) years of relevant industrial experience (5 years including in the proposed specific inspection specialty).
Apply Before: 2023-01-31

Job Description

This position has been created within Company Power Systems Department to attract highly technical and motivated professionals fully conversant with inspection of High Voltage electrical equipment’s in LV, MV and HV electricity networks.  It is anticipated that the successful candidate will drive innovation, influence equipment suppliers and contractors to develop and implement improvements to the installation, maintenance and reliability of electrical equipment.  Knowledge in how the power system operates, good communication skills, understanding of international standards and familiarity with equipment from various suppliers combined with an appreciation of safety and company processes are keys to this position

Job Resposibilities

•    Electrical inspector shall be responsible for at least the following activities: 
•    Beside below listed responsibilities, required to fulfill all day to day routine works /instructions from Sr. Inspector.
•    Perform inspection and witness test of various materials and equipment at site to verify compliance with company standards as per Preventive, predictive, and corrective maintenance.
•    Perform inspections based on audit plan, equipment inspection schedule and overall schedule developed for Preventive, predictive, and corrective maintenance.
•     Monitor maintenance work and quality system to ensure adequate performance and compliance with company quality requirements.
•    Ensure that all repairs and inspection, test record are documented and filled properly.
•    All QC checklists to be filled and compiled. 
•    Attend equipment’s pre-commissioning and energizations. 
•    Prepare inspection and surveillance reports, LBE in QMIS/SAIF or any other system implemented by department.
•    Review contractor quality plans, procedures, and QA/ QC personal qualification if applicable.
•    Perform focused assessments of specific work elements to ensure that the maintenance quality activities and processes are effective.
•    Participate in the mechanical acceptance activities and prepare the Exception Item List (EIL) in (MPCS) as per the guidelines of GI-2.710 if applicable.
•    Attend regular and task-oriented meeting within department and other departments/contractors.
•    Ensure no overdue inspection as per EIS intervals.
•    Report any electrical finding to Operation Foreman and Field Supervisor, issue DN (Defect Notification) or LBE, ensure that ETC does not lead to a hazardous situation and update the completion status to Sr. Inspector. 
•    Ensure that all individuals directly involved in the splicing or termination of electrical power cables with insulation that is rated above 1,000 V have current valid certificates as per GI-0002.705. 
•    Perform the required spot checks on plant maintenance PM check and repair activities on the critical electrical equipment.
•    Report any repair that requires material or design change or any engineering evaluations. 
•    Conduct annual checks on electrical testing instruments, used by maintenance as per ANSI/NETA ATS. 
•    All electrical critical system alarms reported by operation/found in the in the annunciator panel shall be reported as a DN.

Candidate Name (First + Middle + Last Name)

Position Title

Date of Birth



Total Experience

Experience with refinery industries

Experience oil and gas plants

Experience Petrochemical industries

Experience in Power Plant

Power System experience


Expected basic
Salary - SAR

Contact Number

2 Email Ids

WhatsApp number


As per mentioned on website site, email subject should be same




0 - Years

0 - Years

0 - Years

0 - Years

0 - Years

0 - Years







Please follow the instructions to apply on this job first answer all the questions then upload your cv and then follow the below instructions.

  1. Copy the above data table and pest in to the email then fill it.
  2. Copy all the questions on apply page of applying trade and pest in to the email with your answer.
  3. Only attach you detailed resume on email.

send all of the required information including resume at and cc at

If all of above instructions will followed, then you will be the response on your CV.


Apply Now